Legal Law Reform

It could be argued that both the international and the Australian domestic legal systems have both been effective in responding to the need for law reform in modern society. There are four key conditions that have been identified as influencing the need for change to law. Both the parliament through statute law and the courts through common law have important roles to play in bringing about effective change. One important condition that gives rise to law reform is the changing of social values. This means reforming laws to suit the changes in society. Social values are standards that guide people in the direction of wrong or right. The similar views society holds upon these standards is a reflection of public morality. Therefore, in order for the law to be abided and relevant to society it needs to reflect the social value of the people. An example of law reform in this area is seen amongst same-sex relationships. Changing social values led to same-sex couples being recognised as de facto relationships. This led to the Property (Relationships) Act 1984 (NSW). Therefore it is evident that the domestic legal system is effective in responding to changing social values. Another important condition that gives rise to law reform relates to new concepts of justice. As social values change, so does the idea of justice. New concepts of justice come in when the law is incapable of delivering just outcomes to individuals and the community. An example of law reform in this area is seen in the case of capital punishment. The concept of justice shifted from retribution (a life for a life) to rehabilitation. This comes to show the effectiveness of the domestic legal system in responding to concepts of justice. Law reform is also influenced by new technology. As technology advances, pressure is placed upon the need for the law to keep up. This is due to its continuous development. An example of law reform in this area is seen in the introduction of motor vehicles, where the law changed regarding safe driving and road safety rules. On a positive note, the introduction of DNA testing machines, have helped to solve many criminal matters. It is therefore seen that the domestic legal system if effective in keeping up with technological advancements. However, technology continues to advance and in order for the law to remain effective it needs to keep up with these changes. A fourth condition that gives rise to law reform is the failure of existing laws. If a law is not being effective, there is a need for law reform. In order for there to be a law reform, a current law must be broken. An example of law reform is this area is seen in the case of AVO’s. Prior to reform, stalking wasn’t a part of putting can AVO on someone. After a woman was killed because of being stalked, the law changed and stalking was added to the AVO. The two agencies that are most influential in carrying out law reform are the parliament and the courts. In relation to the parliament, statute law refers to laws passed in parliament. This entitles the state, territory and federal governments to all have the right to change the law. One example of recent law reform in relation to statute law in Australia, relates to ‘bikie gangs’ and making them illegal. These new laws provide police with powers to search ‘bikies’. It allows them to make court orders regarding the members that associate together. The courts are another important agency of law in Australia. Common law refers to laws passed by courts. The doctrine of precedent is utilised whereby judges must resolve disputes on the basis of decisions made in similar cases. This alone deems the law effective in providing equality to society. One recent example of common law in action relates to Christian Rossiter, a man with spastic quadriplegia after being hit by a car. He argued with the Supreme Court to allow him to refuse the food he is fed by his carer. In doing this, he agreed to understand the consequences of dying, but to Christian dying was better than staying alive in pain. The law reform commission (LRC) in both NSW and Australia plays an important role. The role of the LRC is to provide and improve access to justice, modernise and simplify the law, eliminate problems in the law, suggest new ways of administrating the law and providing justice and removing out dated and unnecessary laws. At the present time, the LRC is involved in many current projects which are helping in changing the law for the better. It is currently working on areas in bail, penalty notice offences, jury directions in criminal trials and people with cognitive and health problems in the criminal justice system. A case that determines a mechanism of law reform relates to Skye’s Law in NSW. This this case the existing law appeared to be failing. In December 2009 a 19-month-old baby, Skye Sassine was killed in a road rage accident. Police were on a high speed chase after two alleged robbers in Sydney’s southwest. The law which was put in place by the NSW cabinet stated that anyone who leads a high speed chase will face jail terms of up to five years. Therefore it can be seen that both statute law and common law have been effective in allowing the legal system to respond to the need for law to make the legal system function in a more effective manner.

Research on Baroda dairy product Essay

Executive Summary This project has been undertaken in order to understand the Customer Perception and liking towards Baroda Dairy Products. The task is to know and measure its effectiveness in terms of Price , Quality , Quantity , Packaging , Product availability, Product delivery, Product maintenance (storage), merits and demerits of the existing distribution chain, areas and scope of improvement and finding ways to make the Product more user friendly and Available. There are various ways to carry out this project and reach desired objectives for e. g. , Expert Opinion, In-depth interview with Customers, primary data collection and analysis etc. but out of all these options available for data collection, the method chosen was primary data collection and analysis i. e. questionnaire based data collection and analysis. The reasons for choosing this technique for project are as under: This method gives the opportunity to directly interact with the Customers and helps in knowing what they actually think of the Baroda Dairy Products. The most reliable source of information from all the other mentioned above. Gives a better insight of Customer perception as compared to other technique. This technique will yield an Unbiased, To the Point and Reliable result. It is best to know from the Customers as to what they think about the Existing Product and Satisfaction Level. From this project I came to know about co-operative sector, dairy industry, distribution and handling of highly perishable product like milk. I also came to know what Customers think of current Products and Services of Baroda Dairy. Customer loyalty to Baroda Dairy and its products. I got to know various merits of the existing distribution channel. I also discovered some areas of distribution channel which if worked upon can yield more profitable gains and can also increase the availability of Products. I critically analyzed the answers that were provided by Customers. In order to get quality information, I used questionnaire as a tool which helped me in this project. After collection of the desired data, the data has been critically analyzed to draw conclusion out of mathematical data. The collected data has been categorized and presented in to the meaningful diagrammatic presentations following its proper classification. All these analytical information is subjected to the conclusions following justified interpretation of the results drawn from the statistical tools. Introduction Dairy industry is one of the growing sectors in the Indian Food Processing Industry. This sector Grew at CAGR of 3. 7 % in the last decade. An everyday useful industry which was into rags during 1940s is now one of the most performing industry in the country, courtesy – White Revolution. But still the market is dominated by unorganized sector which contributes about 80% of the total milk marketing in the country. Thus lies a very large scope for the organized sector to enter in this industry. Dairy contributes to 16% of consumer spend on food – 18% in Urban areas of the country and 15% in rural areas. It is one of the most important and exceptionally well performing industries. Each and every state has its own Federation that governs various co-operatives in each state which are into processing of milk and other milk products and the Governing body for these state federations is National Dairy Development Board. One of the main reasons for the progress of dairy industry in India was the white revolution and the Co-operative movement. Also what has added to its development is the linkage it has created between producers and consumers which has eliminated the middle man. Also strengthening of production, procurement, infrastructure and technology has made dairy farming India’s largest self-sustainable rural employment generator. Also it is notable that dairy sector has gained prominence over the years as it delivers one of the most important food product i. e. Milk and its by-products without which it is really very difficult to live. Thus looking at the current scenario, following things can be analyzed: On the production side: Slow growth in productivity likely to increase demand- supply gap There is a need to promote interventions that would increase production efficiencies. Need to secure availability of fodder and high quality breeds. Promoting entrepreneurship in large herd dairy farming – through PPP. There is increasing interest in Intensive dairy farming – increasing demand & farm gate price. On the demand side: Indian dairy market offers diverse opportunities to tap into. Unique nature of the market requires entrepreneurs to study it carefully before entry. India has the credit of being the largest producer as well as the biggest consumer of milk in the world. It also has the world’s largest dairy herd (comprised of cows and buffalos). In 2010-11, livestock generated output worth INR 2,075 billion (at 2004-05 prices) which comprised 4% of the GDP and 26% of the agricultural GDP. India’s milk production accounts for 16% of total global output. The dairy industry is expected to grow 4-5% per annum. A budgetary outlay of INR 31, 560 Crores is recommended by the working group for 12th Five Year Plan of Planning commission of India for animal husbandry and dairy sector to achieve growth rate of 6%. In the past 20 years, milk production in India has doubled and has reached the 116. 2 million tonnes a year thus becoming India’s No. 1 farm commodity. The current market size of the dairy industry is INR 2. 6 trillion and is estimated to grow up to INR 3. 7 trillion by 2015. The matters relating to livestock production, preservation, protection and improvement of livestock & dairy development comes under Department of Animal Husbandry, Dairying & Fisheries of the Ministry of Agriculture, GoI. Value-added products like Whole milk powder, Skimmed milk powder, Condensed milk, Ice cream, Butter and Ghee have immense potential for export. As per the latest statistics of National Dairy Development Board (NDDB), the dairy cooperative network in the country includes 177 milk unions covering 346 districts and over 1, 33,000 village-level societies with a total membership of nearly 14 million farmers. All the statistics given above are indicators of a flourishing dairy sector in India providing suitable opportunities to the industries engaged in the dairy business. India: Milk’s New Horizon A growing population and increased incomes from an economic boom are the driving forces behind a surge in dairy product demand in India. One key to the success of recent consumption trends has been an American standby: the refrigerator. Dairy Demand in an Emerging Economy A new study reports that the demand for milk in India will rise by a compound annual growth rate of about 4% over the next few years (RNCOS, 2012). Research shows that as incomes increase consumption of animal products, specifically milk and dairy products, intensifies (Wenge Fu et al. , 2012). In fact, India’s upturn in demand for dairy products far outweighs the growth in demand for animal products such as meat and eggs. India owes this large demand for milk to its largely vegetarian population. Dairy product demand in India has increased dramatically in both rural and urban sectors. However, as a larger population is emigrating from rural areas to cities an even greater demand may be placed on dairy products. Between 1980 and 2010, India’s level of urbanization increased from 23 to 30 percent of the population. The second largest country in the world, India is projected to grow from 1. 2 billion people in 2010 to just under 1. 7 billion by 2050 with 55% of that population being urban. This increase in buying power allows consumers to purchase durable goods such as refrigerators that enable larger consumption of dairy products than ever before. Moreover, a more urban population also offers the increased opportunity for cultural exchange, leading to increased consumption of meat and dairy products not only in India but across Asia. All of these factors coupled together lead to growing international market opportunities for milk and dairy products in India previously unnoticed in the global dairy industry. India is the world’s largest producer of milk. However, the majority of that milk is buffalo, followed by cow and goat milk as shown in Table 1 (FAOSTAT, 2013). Since 2005, 53% of the fluid milk produced in India has come from buffalo, 43% from cows and 4% from goats. In 2011, India produced 34% more milk than the U. S. up from 19% more in 2005 (Table 2). For dairy cow production, the United States produced 70% more milk in 2011 than India. One study by the OECD-FAO in 2011 suggests that India will have sufficient production to meet demand for milk and its products (excluding butter) through 2020. Nevertheless, as Wenge Fu et al. note, the rapid increase in population and changes in consumption patterns make such estimations difficult. Fluid milk demand is projected to grow at 10. 2% per year, while production is projected to grow by 3. 7% based on 1994 to 2004 growth rates. Competition for land to produce grains and feed products for animal production may limit agricultural growth in all sectors. This pressure on natural resources and its effect on production could lead to a greater reliance on imported dairy products. In the short run, India’s dairy sector is well positioned to accommodate the rapid growth in dairy product consumption. An increasingly urbanized population with a greater disposable income will drive demand leading to opportunities from the global milk market to supply this new generation of Indian consumers. Table 1. India’s Milk Production by Species from 2005 to 2011 in Tonnes (FAOSTAT, 2013) Year Item 2005 2006 2007 2008 2009 2010 2011 Avg Buffalo Milk (whole, fresh) Production in Tonnes 52,070,000 54,382,000 56,630,000 57,132,000 59,201,000 62,350,000 62,350,000 % of total production 54% 55% 54% 53% 53% 53% 52% 53% Cow Milk (whole, fresh) Production in Tonnes 39,759,000 41,148,000 44,601,000 47,006,000 47,825,000 49,960,000 52,500,000 % of total production 42% 41% 42% 43% 43% 43% 44% 43% Goat Milk (whole, fresh) Production in Tonnes 3,790,000 3,818,000 4,481,000 4,478,000 4,467,000 4,594,000 4,594,000 % of total production 4% 4% 4% 4% 4% 4% 4% 4% Total Production in Tonnes 95,619,000 99,348,000 105,712,000 108,616,000 111,493,000 116,904,000 119,444,000 Table 2. Milk Production in India and the United States from 2005 to 2011 (FAOSTAT, 2013) Year Country 2005 2006 2007 2008 2009 2010 2011 All Milk Production in Tonnes India 95,619,000 99,348,000 105,712,000 108,616,000 111,493,000 116,904,000 119,444,000 USA 80,254,500 82,463,000 84,189,100 86,177,400 85,880,500 87,474,400 89,015,200 % Difference between India and U. S. 19% 20% 26% 26% 30% 34% 34% Cow Milk Production in Tonnes India 39,759,000 41,148,000 44,601,000 47,006,000 47,825,000 49,960,000 52,500,000 USA 80,254,500 82,463,000 84,189,100 86,177,400 85,880,500 87,474,400 89,015,200 % Difference between U. S. and India 102% 100% 89% 83% 80% 75% 70% As we have already seen how the production of milk and its consumption have increased over the past decade thus the problem of it distribution and availability also arises. This brings the problem of Effective distribution channel into light. For the same purpose the study has been undertaken in order to Measure the Effectiveness of the Distribution System of Baroda Dairy. Introduction to Gujarat Cooperative Milk Marketing Federation Ltd. The GCMMF is the largest food products marketing organisation of India. It is the apex organisation of the Dairy Cooperatives of Gujarat. Over the last five and a half decades, Dairy Cooperatives in Gujarat have created an economic network that links more than 3. 1 million village milk producers with millions of consumers in India. The cooperatives collect on an average 9. 4 million litres of milk per day from their producer members, more than 70% of whom are small, marginal farmers and landless labourers and include a sizeable population of tribal folk and people belonging to the scheduled castes. The turnover of GCMMF (AMUL) during 2010–11 was 97. 74 billion (US$1. 7 billion). It markets the products, produced by the district milk unions in 30 dairy plants. The farmers of Gujarat own the largest state of the art dairy plant in Asia – Mother Dairy, Gandhinagar, Gujarat – which can handle 3. 0 million litres of milk per day and process 160 MTs of milk powder daily. GCMMF is a unique organization which is created by farmers, managed by competent professionals serving a very competitive and challenging consumer market. It is a true testimony of synergistic national development through the practice of modern management methods. GCMMF Gujarat Cooperative Milk Marketing Federation Ltd. (GCMMF), is India’s largest food product marketing organisation with annual turnover (2012-13) US$ 2. 54 billion. Its daily milk procurement is approx 13 million lit per day from 16914 village milk cooperative societies, 17 member unions covering 24 districts, and 3. 18 million milk producer members. It is the Apex organisation of the Dairy Cooperatives of Gujarat, popularly known as ‘AMUL’, which aims to provide remunerative returns to the farmers and also serve the interest of consumers by providing quality products which are good value for money. Its success has not only been emulated in India but serves as a model for rest of the World. It is exclusive marketing organisation of ‘Amul’ and ‘Sagar’ branded products. It operates through 48 Sales Offices and has a dealer network of 5000 dealers and 10 lakh retailers, one of the largest such networks in India. Its product range comprises milk, milk powder, health beverages, ghee, butter, cheese, Pizza cheese, Ice-cream, Paneer, chocolates, and traditional Indian sweets, etc. GCMMF is India’s largest exporter of Dairy Products. It has been accorded a â€Å"Trading House† status. Many of our products are available in USA, Gulf Countries, Singapore, The Philippines, Japan, China and Australia. GCMMF has received the APEDA Award from Government of India for Excellence in Dairy Product Exports for the last 13 years. For the year 2009-10, GCMMF has been awarded â€Å"Golden Trophy† for its outstanding export performance and contribution in dairy products sector by APEDA. For its consistent adherence to quality, customer focus and dependability, GCMMF has received numerous awards and accolades over the years. It received the Rajiv Gandhi National Quality Award in1999 in Best of All Category. In 2002 GCMMF bagged India’s Most Respected Company Award instituted by Business World. In 2003, it was awarded the The IMC Ramkrishna Bajaj National Quality Award – 2003 for adopting noteworthy quality management practices for logistics and procurement. GCMMF is the first and only Indian organisation to win topmost International Dairy Federation Marketing Award for probiotic ice cream launch in 2007. The Amul brand is not only a product, but also a movement. It is in one way, the representation of the economic freedom of farmers. It has given farmers the courage to dream. To hope. To live. GCMMF – An Overview

Arkansas/Arkansaw Book Review

What is the first thing that comes to mind when you think of the state of Arkansas? Chances are, that as an Arkansan the thoughts are quite different than those of someone not born or raised here. Hillbilly, redneck, barefoot, and trailer are a just few of the common first words invoked in the minds of â€Å"foreigners† by the word Arkansas. In the non-fiction work, Arkansas/Arkansaw: How Bear Hunters, Hillbillies, and Good Ol Boys Defined a State, author Brooks Blevins provides readers with his idea of how Arkansass image began, and then perpetuated over time. He provides several examples of the creation and reiteration of this imagine, beginning as early as the 1800s and progressing all the way into the 2000s. Not every example provided in the book reflects a negative image, as Blevins is trying to prove that there are positive aspects, it has progressed over time, and is ultimately the Arkansans perception of it that determines its power. The books provided so much information of the state I am proud to call my home, and I believe that Brooks Blevins was successful in his presentation and purpose! I was pleased to find that Blevins writes this book as an Arkansas native rather than an opinionated outsider with no identity in the subject of his work. I feel that it is this factor alone that gives the book such a genuine feel. I was also pleased to find that Blevins once worked as a professor at Lyon College, which is located in my hometown. This gives me an even stronger sense of familiarity with him. The book is intended to be read by anyone interested in the subject, although it seems natural that interest would be primarily with historians and Arkansas natives. It is this readers interest that actually influences the effectiveness of Blevinss writing. Obviously, efferent readers and aesthetic readers will be seeking different things from the text and therefore take away different things from the text. But in the end, Blevins hopes that all readers will recognize the many ways in which Arkansas has fit into our nation as whole, both then and now. Blevins uses interesting techniques presenting the Arkansas image. The most unique and effective techniques is his vocabulary. â€Å"Arkansaw† is the word he uses â€Å"when referring to the states image and when invoking the mythical place conjured various stereotypes and caricatures† (5). This helps to distinguish general information from information directly related to â€Å"the mixture of fact, legend, and stereotype† that comes to mind when Americans think of Arkansas (5). Blevins also makes use of the word â€Å"Arkansawyer† to describe inhabitants and the â€Å"different reactions Arkansas people have to the Arkansaw image† (6). Another distinction in vocabulary that Blevins chose is the use of the word image in the place of identity, which implies an always active participation in the defining of a reputation. These methods contribute to the tone of the book as well as the readers understanding of the authors presentation. Blevins illustrations of Arkansass image span the course of hundreds of years. The first images presented in the books stem from early travelers to the state. The opinions of most of these travelers were mixed, with many of them describing neanderthal like conditions. Francios Marie Perrin de Lac of Arkansans, â€Å"They pass their time playing games, dancing, drinking, or doing nothing, similar in this as in other things to the savage peoples with whom they pass their time† (12). Other visitors describe humble dwellings, plain clothing, endless hunting and lots of weapons. Throughout most of the books first chapter Blevins recounts the experiences of several travelers who all seem to agree that Arkansas is a state full of lazy, violent people with no regard for the rest of the nations idea of civilization. Blevins suggest that much of the disparity in Arkansass definition of normal and the rest of the countrys comes from Arkansass geographical location. He says that because, at this time, Arkansas is blocked on the east by swamps and on the west by Indian territory it became â€Å"backwater†. Unfortunately much of Arkansass reputation at this time was negative. There are a few travelers that noted the simple goodness of Arkansans at this time. Travelers such as Friedrich Gerstacker and Washintgon Irving presented a softer side to the prominent savage-like image described by others. Gerstackers perception of Arkansans was descibed as primarily positive. He described the Arkansans he encountered as â€Å"honest and upright† and reported that Arkansas was his favorite of all the states in America. Irving said that Arkansans, â€Å"have none of that eagerness for gain, and rage for improvement, which keep our people continually on the move† (22). He had a respect for the slowed down, simple way of like Arkansans lived every day. Blevins depicts both positive and negative travel accounts and memoirs, although he believes that their impact is difficult to measure. As the book progresses through the years, Blevins begins to introduce several famous faces that call Arkansas their home, in what he calls the Heyday of the Hillbilly. He mentions everyone from musicians to actors, athletes to novelists, and intellects to political figures. For each one mentioned, Blevins describes their experience with the Arkansas image, whether they found a way to embrace it or let it bring them down. Its interesting that he does not limit this presentation to individuals born and raised in the state, and includes some that instead have â€Å"adopted† Arkansas as their home state. All of the Arkansans he describes have impacted or been impacted by the image of their state. My favorite part of the book is actually the conclusion. Blevins begins this by describing an incident that I actually remember. In 2000, while the governors mansion was undergoing extensive renovations, Governor Mike Huckabee and his family chose to stay in a triple-wide trailer. The move was quickly met with laughs and â€Å"I-told-you-sos† from all over the country. The best part of the story is that the Huckabee family embraced the situation and joined in the laughter! Huckabee said, â€Å"Let the people laugh. I think that the difference between an Arkansas and an uptight, wound-up northerner, is that were laughing with you, because we like the way we live† (186). This acceptance is what I believe is the central goal of Blevins writing. Through this book, what I think Blevins really wanted to achieve was an acceptance of the Arkansas image. He mentions what he calls the Arkansans inferiority complex and says that â€Å"people of Arkansas are probably more obsessed with their states image than are people of any other state† (186). Blevins suggests that although the nations reaction to the governors manufactured mansion implies that Arkansass hillbilly image still exists, it is no longer in the forefront of peoples mind that they think of Arkansas. Blevins goes on to identify statistics about everything from education to violence, with Arkansas â€Å"generally low where you want to be high and high where low might be a good thing† (188). However, the statistics he discusses show that Arkansas is not always the worst state in the nation. As an Arkansan, I was so shocked to read all of the negative things others about my state, although I have heard some of them myself a time or two. All Arkansans are aware that we are typically viewed in a â€Å"less civilized† light than the rest of the country. But one thing I have always held in my mind is that we cant possibly be nearly as uncivilized as the state of Mississippi.. I laughed to see Blevins use of the phrase â€Å"Thank God for Mississippi†. Part of having pride in your state is accepting that you will never be able to change an image that has been so widespread for so long. Its always better to just embrace it, join in the jokes, and no that no state is free from stereotypes or stigmas. It is a nationwide thing! Overall I was very pleased with Blevins argument in the book. The way in which he chose to approach the creation of the image was interesting and I enjoyed the various accounts he utilized. I also enjoyed learning about famous figures from my state that I had not previously known. He does a great job of presenting the information in a entertaining and real style. His pride in his home state shines through and inspires me to learn more about my state so that I can better embrace my title as a true Arkansan!

Business environment in Arizona Case Study Example | Topics and Well Written Essays - 1000 words

Business environment in Arizona - Case Study Example In a business environment the federal court system undertakes cases that fall under the national jurisdiction. Federal state laws have a limited jurisdiction cover when handling cases. The US constitution has specified cases that involve multi-state companies in a business fraud situation. Handling interstate disputes in all relevant fields including company tussles, allocations of contracts are all catered by the federal government ("Federal Courts. State Practice or a Federal Right", 1917) Federal laws are formulated to deal with bankruptcy cases. The nature of fraud associated with these cases. Concealment of assets by financial institutions is often the immediate response, thus culprits use fake files in different states. This offense mostly accompanies money laundering, identity theft and public corruption; these crimes are all handled by the federal law ("Bankruptcy. Preferences. Right to Rescind Transaction for Fraud", 1922) Admiralty law is another special section handled by the federal law; this is the section that deals with maritime offenses. This is a very relevant section of people who handle business transactions. Offenses relating to water vessels, violation of water transport laws are handled by the federal government (OceanPortal) State court structure This system of law and the judiciary is more specifically set for civil cases. The major factor that distinguishes this system from the federal law is a broad jurisdiction. Multiple spectrum of both civil and criminal offenses are covered by state law.

Political and Social Reality of the City of Seoul Research Paper

Political and Social Reality of the City of Seoul - Research Paper Example Polarization refers to the process of grouping of two opinions into two extreme ends. Social polarization arises from the normal societal stratifications and depicts itself in nearly every aspect of life in the people habiting a particular geographical location. Polarization arises from conventions of life some of which people abide by naturally yet others follow economic capabilities and stratification mechanisms. Every community, including the modern day urban settlements, have different opinions among its inhabitants often resulting in either polarization or quasi polarization.   The city of Seoul in southern Korea is therefore no exception and experiences one of the most radical extents of polarization evident in its pattern of habitation and the people’s way of life in the city. The special city of Seoul is the capital city of South Korea and arguably the largest modern day metropolis in the entire Korea. It is home to approximately fifty million people most of whom are South Korean nationals but also provides residence to more than ten million international business people (O'Loughlin 33). The city has an elaborate design, one that considers and showcases the economic growth of the country and its interesting history. The architecture of most skyscrapers in the city embodies the modernism in design and comfort but also imbed the rich cultural history of the South Korean people. The wide clean highways, the artistically tall building structures, and the every glaring subway stations among other interesting features such as Seoul’s nightlife all act as a unifying feature to the diverse people of the city. However, behind the glamor and the beauty, the truth of the city lies in a more analytical scrutiny of the residences’ way of life. ...where is accessible and every product available in the market, the price tag on the commodities and services in the market always ensure that the rich rarely interacted with the poor. Additionally, it provides for an effective mechanism of keeping the rich to their own society and possibly denying the poor access to such societies. Seoul is one such city. Being an industrial country, the South Korean economy grows very fast with international businesses giving rise to extremely wealthy businesspersons and business empires. The wealth disparity and economic imbalance influence the design since the city has to include all its residences despite their financial positioning. This has resulted in the birth of two residential regions namely the Gangnam and the Gangbuk.  

Reflection paper Essay Example | Topics and Well Written Essays - 250 words - 11

Reflection paper - Essay Example However, the concept internalization is dependent on the preceding class lessons and exposure to interaction with the lessons learnt (Bradshaw, 2001). Teachers too need a grasp of this learning cycle that students go through in order to structure their lessons in such a manner to boost interaction and merging the theoretical information and the practical or the real aspects. Understanding by a first grade is different from being a fifth grade based on the perception of simple key facts. Kindergarten and first grade students know content mostly by experiencing and making a comparison with their life. On the other hand, second grade students are better informed than their successors because they know the content by still fumble with a solid understanding. Fourth and fifth grade students can be thought of to have come off the confusion stage owing to their ability to just know and understand what they are dealing with. The article proposes a research on students to be able to understand how they know. It is true that teachers who put their students through assessment ought to understand them better are better prepared to structure their curricula into one that meets their needs effectively (Bradshaw, 2001). After the research teachers come to the realization that experience to students is a crucial affair. It guides in understanding the students level of articulating issues and the approach

Budget Assignment Example | Topics and Well Written Essays - 500 words

Budget - Assignment Example The budget cuts across machinery $27 million, fire engines $32 million, fire education $10 million, servicing of the existing engines and machinery with the approximate cost $ 5 million, emergency cases among other miscellaneous costs (Ballam, 2013). After reading Bland’s book on which tax revenues are more likely to be budget neutral, I took some interest on capital improvement plan and the ways to finance the proposed project in government’s public sector as per the views of the publication called A Budgeting Guide for Local Government. In order to understand the ways of funding the given project in the capital development plan, one needs to get acquainted with the purpose of the intended project(s). The main drive of planning is to match and forecast projected capital and revenues needs over a given time frame, for instance a year, six months. The capital improvement plan is inclusive of information such as a listing of the capital projections or equipment intended to be purchased, the priority list for given project, the plan for funding the projects, the defense of the projects, as well as the elaboration of all the expenditures for the given projects (Bland, 2013). The fire department’s development plan that needed further analysis is the section concentrating on the financing choices for the project of around $1.3 million. Well-wishers, national government and local government can fund fire services’ projects using a pay as you use option. In the first option, the government depends on the existing revenue sources to fund different projects in the emergency services, fire department. These revenues get sourced from diversified sources such as current taxes, for example, petroleum taxes for highway developments, grants courts and reserves accumulated over time. When the needs to finance a definite project is more than the present revenue available to fund the project in question,

Managing Organizational Change Research Paper Example | Topics and Well Written Essays - 1000 words

Managing Organizational Change - Research Paper Example o be answerable to each other on the same tier as well as to the owners and stakeholders of the organizations who have invested within them for so long. Perhaps it would be a good exercise to bring in the change smoothly. This shall make the entire process an easy one and put the crux of the exercise safely within the grasps of the people who are ready to undertake such a change for their own good. This change element within the domains of the organization could be handled if there are proper mechanisms in place and which look to provide the remedy for the quandaries that employees find themselves engulfed in every now and then. It is important that these employees know what they need to do in order to remain satisfied with their jobs. This will make them feel secure with the jobs that they have got and not try to hop on every opportunity that they can get. An organizational change setting that does not bring in a sense of optimism within the workplace realms is indeed a classic case of failure (Douglas, 2009). This is because organizational change has to happen smoothly and without any hindrances whatsoever. It makes the task pretty easier if things are handled in a proactive manner rather than something else. Also the organizational change should be such that the employees are told about the change beforehand because no employee appreciates the idea of changing every now and then. It has been a fact that change is a constant factor that takes place almost everywhere but since it is something that is seen as undesirable, it takes sheer resistance on the part of the employees regularly. In order to make sure that the organizational change is successful, it is imperative that this change is backed up with improving the morale of the employees because this will ensure... This report stresses that the impacts of resources that are available within an organization are severely significant nonetheless. This is because they have to find out the basics related with the organizational change and how this change is going to showcase better employee morale and more dedication at the end of the day. It would also mean that the employees remain satisfied with what they are receiving in terms of the resources and how contented they are in knowing the fact that their resources are being well-equipped nonetheless. The resources’ discussion is always an important one because it tells the employees beforehand how significant they are for the sake of the organization and what measures need to be taken to make sure that they become important with the passage of time. This indeed is a symbiotic relationship which should always be encouraged and supported across the board, at all levels. This article makes a conclusion that it is necessary to comprehend how sound an organizational change strategy would work for the sake of the organization under question. If this is proper and within the frameworks as has been suggested and decided upon, then this will mean serious success for the employees who are working at different levels as well as the employers who seek retention of their employees and better usability of the available resources at their disposal. One must understand that these are serious attributes that come attached with the morale discussions of the employees and should always be treated as such.

Evaluate the Relation Between the Media, Politicians and Big Donors in Essay

Evaluate the Relation Between the Media, Politicians and Big Donors in UK - Essay Example The big donors provide the huge funds for the politician’s campaigns with the aim of influencing some policies or deals when the politicians attain official or elected positions (Koss 17). With these few examples, it is apparent that there is a relationship between big donors, politicians and the media. In politics, the media has direct impact or influence on the public, as it conveys all the political messages required to sway the public in a particular direction. Therefore, for the politicians to be successful in their political bids, they have to be intertwined with the media. This is not unique for the United Kingdom, since other politicians running different affairs in other countries practice the same. The media is the main source of news for every person in the United Kingdom, therefore, making it an important tool in furthering political agendas. It influences the public immensely by swaying their perception about different politicians. The media also helps in exposing scandals that may be detrimental to some politicians’ career (Dean 12). Take the example of the United Kingdom parliamentary expenses scandal that was exposed in 2009 by the Telegraph Group. The Daily Telegraph published copies of the expenses records, which proved that members of parliament had misused the taxpayers’ money through bloated allowances and expenses. The media focused on the scandal, thus provoking anger among the citizens who demanded for the resignation and prosecution of the members of parliament involved in the scandal. The immense power of the media was demonstrated, as it was able to inform the people about secret mischievous dealings that were happening in parliament. The media was able to invoke anger in the public and create the image of a failed legislature. Owing to the media, the public lost confidence in some politicians; therefore, creating pressure for the

The Black and Decker Corporation Case Study Essay

The Black and Decker Corporation Case Study - Essay Example Case Study Synopsis A. Company Overview; Dissecting the Case The Black & Decker Corporation is an American firm that manufactures and markets power tools, power accessories, fastening systems, products for home improvements, and hardware. It manufactures its products in eleven countries spread worldwide, and markets those in a hundred plus countries. Its biggest markets are the United States, which accounted for 55 percent of all revenues in 2008, and Europe, for 25 percent in the same year. 2008 revenues were US 6.086 billion dollars, while gross margins were 32.8 percent for that year. By product group contribution, power tools contributed 73 percent of all revenues in 2008, at US 4.3 billion dollars, followed by hardware and products for the improvement of the home, at US 900 million dollars, making up 15 percent of all revenues. The balance was made up for by revenues from fastening systems, which was the smallest product group by revenue for that year, accounting for 12 percent of all sales, valued at US 700 million dollars (Black and Decker, n.d., pp. 1-14). By way of a look forward, by 2012 the Black & Decker Corporation had ceased to be an independent firm, having been bought out by Stanley Works in 2010, so that the merged entity had come to be known as Stanley Black & Decker Inc.(Google Finance, 2012; Stanley Black & Decker Inc., 2012; Black and Decker, n.d.; Reuters, 2012 (b)). ... The hypothesis is that the traditional market strengths of the original Black & Decker Company had something to do with this share price appreciation(Reuters, 2012; Google Finance, 2012; Reuters, 2012 (b)): Image Source: Google Finance, 2012 B. Business Groups and Market Segments Three product groups serve as the organizing principle of the organization. These product groups are, as already mentioned earlier, power tools, product for home improvement and hardware, and fastening systems. Of the three, as has been noted earlier, power tools make up the bulk of the revenues (73 percent), followed by home improvement at 15 percent, and fastening systems at 12 percent of all revenues. Absolute profits rankings are the same, with power tools contributing the most to profits, followed in the same order by the two other product groups (Black & Decker, n.d., pp. 1-14). Three different market segments for the power tools product group, the largest product group, have differing characteristics, defined along customer type. As discussed earlier, these are industrial users, general consumers, and professionals. Of the three, the company has had success with industrial users and general consumers, while as noted earlier, prior to the launch of the DeWalt brand, the corporation had suffered anemic following among professionals, owing to the market perception that the company's products were inferior (Black & Decker, n.d., pp 3-5). Moreover, the three market segments also differ in some other profound ways. Industrial users are the most demanding, requiring that products show resistance to wear and resilience, even as the rewards include long-lasting relationships with buyers, and large and frequent orders. Professionals, using the products as essential trade tools,

Judaism religion and practices Essay Example for Free

Judaism religion and practices Essay Judaism is a religion that is practiced mostly by the residents of the Jewish country, all followers of Judaism whether they are born in the Jewish country or not are called Jews. Judaism is the Jews monotheistic religion which traces its genesis to Abraham, its ethical and spiritual principles are engulfed mainly in the Talmud and the scriptures of the Hebrews. This religion is mostly characterized with the traditional rites and ceremonies of the Jewish people and religion. Its practices are also deeply rooted in the religious, social, and cultural practices of the Jewish people who consider themselves as one community or people (Steinberg, 1965). Judaism religion and practices Judaism is based on the premises of monotheism, the belief of a special covenant with the almighty God that makes the Jews to claim that they are the God’s chosen people. It is also based on the territorial and ethnic identity, whereby the territory of the Jews is known as the Promised Land. This religion has specific laws and practices. The origin of Judaism finds its roots either from the formulation of monotheism by Moses or God’s covenant with Abraham, the religion recognizes that the laws attributed to Moses incorporated the Pentateuch. However, the political part of Judaism is much related to King David, the king who had Judah as his capital and who planned the Jerusalem temple, which was later built by Solomon who was his son. During the period of the Jewish captivity in Babylon the Judaism religion was much consolidated, the Mosaic was also written during this period (Grabbe, 2000). The Jews believe that the difference between civil and divine law is not clear at all. They believe that the supreme power comes from God and thus the command of God is law, whether it is civil or religious. The Mosaic Law dates back to the 5th BC. This law was then interpreted by Midrash and the Talmud. The Talmud incorporates civil and religious laws that are not in the Torah as proper and thus goes ahead to explain them (Steinberg, 1965). The Jews firmly believe that they are the God’s chosen people who have the duty of shedding light to all other nations around the world. God made a covenant with the Jews through Abraham and later renewed the same covenant with Moses, Isaac and Jacob. The worship of Yahweh was mainly centralized in Jerusalem ever since the time of King David. The demolition of the 1st Jerusalem temple by the people of Babylon which was later followed by the Jews exile ushered in a new hope of national reinstallation under messiah leadership. The Persians later freed them from exile, but the rebellion failed against the Romans made the second temple to be destroyed and the subsequent dispersal of the Jews around the world (Grabbe, 2000). Judaism religion emerged to substitute the practices and beliefs linked with the Jerusalem temple, this was mainly because the Jews carried with them their religion and culture through their strict observance and via a scholarship of tradition. The greatest part of the commentaries and oral law were written down by the Mishna and Talmud. Judaism religion continued despite that it experienced very harsh persecutions by several nations around the world (Steinberg, 1965). The Judaism religion regards itself as a widespread religion; this is due to the fact that it views is laws to be appropriate for all mankind. It has a distinction between the non Jews and the Jews. The traditional Judaism requires all the Jews to follow all the commandments found in the Bible. On the other hand the non Jews should only follow seven laws out of the six hundred and thirteen laws. These seven laws demand that everyone whether a Jew or a non Jew to believe in only one God, they forbid murder, blasphemy, sexual immorality and theft. They also prevent anyone from feeding on a living creature’s limb. The seven laws also mandate the setting up of law courts. The Jews believe that, a non Jew who follows all the seven laws to be righteous, and is therefore, just like a Jew who follows all the six hundred and thirteen laws that are upon him (Fine, 2001). The fundamental orientation of Judaism is practical. It has no body of doctrine that is officially recognized, but it has various beliefs that are quite essential to all the Jews. The Jewish belief is rooted in the Jewish law and not in any systematic Theology. The issue about punishment and reward in life after death is a new development in this religion. Pre occupation and asceticism with life after death are discouraged. Redemption is obtained via good conduct and not through faith. Judaism believes that everyone has a duty to contribute towards perfecting this world (Steinberg, 1965). The practice of this religion of Judaism has never been restricted to only the people who were born of the Jewish community. However, the attitudes towards one being converted to Judaism have varied significantly in various localities and periods. It has always been doable for the non Jews to join Judaism. In fact, some of the greatest individuals of Judaism were either people who had been converted into Judaism or their descendants. A good example is King David; he was one of Ruth’s descendants. Since people hood and religion are quite inseparable in the religion of Judaism, acceptance of the beliefs of Judaism makes one to eventually become one of the Jewish people (Grabbe, 2000). Judaism emphasizes that each and every Jew should be responsible for the other and they should therefore live like one big community, this has made the Jews to develop a great sense of unity. No Jew should look at another Jew nonchalantly when he or she is suffering. They are required to do all that is possible to make sure that they alleviate such Jews from the suffering they are going through. Hebrew does not have charity, but it uses tsedakah which means justice. It means that it is only proper and just for those Jews who are blessed with more to share them with the less fortunate Jews in the society. The Jews mutual responsibility for each other stretches to include even violation of law cases: if a Jew finds another Jew violating the law, he or she is supposed to rebuke the Jew who is violating the law (Fine, 2001). Judaism religion also emphasizes on the need to elevate profane to the holiness state. Thus, most of what would have been considered ordinary includes ritual components which are intended to sanctify. For example, while eating there has to be benedictions before starting to eat the food and after eating it. This makes the table to be similar to the altar. Judaism has a lot of laws which are meant to regulate the daily life of the Jews; the aim of this regulation is to modify the actions of man into God’s service. Judaism also regards the restrictions of Torah myriad upon the conduct of a Jew as ones that elevates him. It views the uncontrolled expression of mankind’s appetite similar to that of the animals and the control measures placed upon mankind serves him by raising him higher. Thus, before a Jew eats any food, he has to first consider whether the food in question meets all the dietary law requirements. If it fails in any then he cannot proceed to eat it as he will consider doing so as violating the law (Fine, 2001). Asceticism is not considered as a virtue in Judaism. The Midrash provides that when everyone accounts for herself or him self following his or her death, such a person has to account for all the allowed pleasures of the world which he restricted himself from doing while on earth (Grabbe, 2000). Conclusion Judaism religion is mainly found in among the people of the Jewish nation but has never been restricted among these people only as it also accepts people from other origins to join them and thus practice the doctrines of the religion. The Jews, who are the members of Judaism, consider themselves to be the people who have been chosen by God and thus all other tribes in the world should follow them. The laws of the Jews, according to Judaism are applicable in all circumstances to all nations around the world which makes the Jews to claim that their religion is universal. Reference: Fine, L. (2001): Judaism in practice: from the middle Ages through the early modern period; ISBN 0691057877, Princeton University Press. Grabbe, L. L. (2000): Judaic Religion in the Second Temple Period: Belief and Practice from the Exile to Yavneh; ISBN 0415212502, Routledge. Steinberg, M. (1965): Basic Judaism; ISBN 0156106981, Harcourt, Brace, Jovanovich.

Organizational Behavior Critical Thinking Essay Example for Free

Organizational Behavior Critical Thinking Essay I have chosen three theories to address the problem. The first theory is Schwartz’s Value Theory. According to the theory, everyone has each own set of personal values and the attainment of these personal values is crucial. Conflict of values or failure in attaining them might lead to employees’ turnover. From the article, the senior staffs claimed that the bonuses they received were below average. I infer that some of the staffs’ personal values were not attained, which in this case possibly power and achievement. Their personal values might also have conflicted with the company’s values, which lead to their departure. Herzberg’s Motivator-Hygiene Theory is also applicable in addressing this issue. According to the theory, there are some factors those lead to both work â€Å"satisfaction† (motivators) and â€Å"dissatisfaction† (hygiene). The absence of recognition which is one of the motivators leads to no satisfaction and the presence of hygiene factors such as poor salary and violation of company’s policies such as not paying bonuses that the executives deserved might lead to â€Å"dissatisfaction†. This  presence of â€Å"dissatisfaction† might be the major reason for the staffs to quit. Lastly, according to The Three-Component Model of Organizational Commitment there are three types of commitment that create a binding force, those may reduce the high turnover. They are namely Normative, Continuance and Affective commitment. Affective commitment is mainly influenced by personal characteristics and values and is closely related to the Schwartz’s Value Theory. This commitment also takes into consideration work experience, which might support the executives’ decision to quit. Violation of psychological contract is a factor that may cause Normative commitment to be ruptured. UBS has failed to meet the expectation of some of their executive and this can be seen as hygiene factors according to Herzberg’s Motivator-Hygiene Theory which leads to â€Å"dissatisfaction†. The model, so far, has covered the other two theories. Adding on to that, this model also includes the possibility of external factors that might lead someone to leave a company. In this case, availability of job alternatives in other companies, which compromise their Continuance commitments, might be another force that encouraged executives to leave their positions in the company. Therefore, I conclude that this model, in comparison with the others, is the most appropriate model to address the problem of high turnover in UBS as it covers more possibilities and gives us a more complete view of why the senior staffs may have left the company. UBS is very sensitive to the performance of the world’s economy as it runs in the area of financial service. Poor global economic performance or recession is a major factor that influences the problem of high turnover faced by UBS. Most of the decisions must be made carefully by the company as it involves very high risk level. Through these decisions, UBS has to maintain or even improve the job satisfaction level of its employee and at the same time, continue to give excellent performance. Wrong decisions might cause UBS to lose its employees even its key executives. In the time of financial crisis, it is more difficult for UBS to maintain both its employees’ job satisfaction and also its performance. This depends largely on the company’s policy and also the decisions made by the company. For instance, in Wall Street Meltdown in 2008 UBS made a US$32 billion loss and its stock value plunged by almost 70% (Gross, 2008). One of the decisions that the company made was to fire 8900 employees worldwide (Ubs lay off, 2008). The increased in the regulation  of financial industry such as tax on financial may also affect the performance of UBS negatively. Financial Analysts predicted that this increase in regulation will reduce the size of the industry (Adams, 2011) and this leaves UBS with no other option than cutting off the number of its employees. This decision made might negatively impact the rest of the employees as they would feel insecure in their positions. This factor can also be seen as one of the hygiene factors which lead to â€Å"dissatisfaction† and this result in the high turnover. Apart from that, the competitive nature of the industry itself intensifies the challenge faced by UBS. Due to lower bonuses that it paid to its executive in comparison to the rival companies might encourage the executives to switch company. For example, Edward Cook who has worked for UBS for 28 years decided to join Morgan Stanley very recently (Philbin, 2011) and Suneel Kamlani, who has worked for 21 years in UBS, decided to join RBS just last year (Muà ±oz, 2010). This shows that it is definitely a challenge for UBS to elicit higher levels of commitment of its employees and executives. Availability of position and better payment offered by rival companies will test the loyalty of the UBS’s employees. Hence, the high competition among banks also induces the high turnover in UBS. To reduce turnover, managers should cultivate the company’s value in the employees. This will reduce Individual-Organizational value conflict and it can be done through training sharing of the company’s vision. Managers also have to respect the psychological contract and should propose more-defined policies to company as it may reduce job dissatisfaction. In time of crisis, company may also maintain the Continuance Commitment of the employees by paying the bonuses by using the company’s share. However, all of the solutions I proposed may not be successful as they do not take into account the other external factors and the success also depends on the personal characteristics of the employees. References Shehan, Tom, S. ,. T. (n.d.). How to retain employees: a high turnover rate is costly in both direct and indirect costs. . Retrieved from http://www.allbusiness.com/management/447495-1.html Gross, D. (2008, July 07). Phil gramms ubs problem. http://www.slate.com/id/2194933/ Ubs lay off job cut: may fire 1900 employees. (2008, October 01). Retrieved from http://www.finance-trading-times.com/2008/10/ubs-lay-off-job-cut-may-fire-1900.html Adams, B. (2011, August 30). The big layoff: struggling financial giant fires thousands of employees. Retrieved from http://www.theblaze.com/stories/the-big-layoff-struggling-financial-giant-fires-thousands-of-employees/ Philbin, B. (2011, September 14). Street moves: morgan stanley hires rbc, ubs financial advisers. Retrieved from http://online.wsj.com/article/BT-CO-20110914-711796.html Muà ±oz, S. S. (2010, April 12). Rbs hires key executive from ubs. Retrieved from http://www.efinancialnews.com/story/2010-04-12/rbs-hires-kamlani-executive-ubs

Unmanned Aerial Vehicles (UAVs) in Subconventional War

Unmanned Aerial Vehicles (UAVs) in Subconventional War CHAPTER- I INTRODUCTION 1. Many military strategists and theorists have concluded, based on recent history, the nature of future wars will be limited to regional and intrastate conflicts. Large interstate wars such as World Wars One and Two and the Persian Gulf War are not likely to be the wars of the future. UAVs are increasingly standard features of the modern combat theaters and Low Intensity Conflict zones where ISR missions may need to be carried out. Todays ISR missions are sophisticated operations. Covert or overt, they are executed using traditional techniques and modern technology – with expensive equipment and infrastructures often requiring highly skilled operators. Remotely Piloted Vehicles (RPVs)/Unmanned Aerial Vehicles (UAVs) are small unmanned aircraft which came into being as mans quest for newer and better tools of warfare. 2. Unmanned aerial vehicles (UAVs) will play a key role in dealing with low intensity conflicts abetted by both internal elements and unfriendly neighbours. Indias great neighbours not being really friendly be it Pakistan or China. Avoiding all risk to human life or manned search aircraft operating in hostile territory, poor weather or hazardous environments, UAVs fitted with sensors can be used to safely perform the Search-Locate-Identify elements of importance in a missions. Unmanned (or uninhabited) aerial vehicles (UAVs) are methodically becoming a central theme in the mosaic of Air Force systems and capability. The questions regarding employment of UAVs are not so much about if they should be developed but how to integrate them into Air Force doctrine and organizations. The Study identified reconnaissance UAVs as one of the high leverage systems of the future. Accordingly, the Air Force has made a concerted effort to develop UAVs and sensor technologies with a particular emphasi s on intelligence, surveillance, and reconnaissance (ISR) applications. This paper addresses considerations for improving the future application of UAVs for the ISR mission and their employment in LICO across our vast borders. Specifically, this research illustrates that UAVs in concert with manned and space assets addresses several Air Force ISR needs. Furthermore, the Air Force should seize the opportunity to leverage the rapid advances in sensor and information technology to increase the capability of UAVs to perform ISR while also performing other vital air power missions. 3. Used as drones in the First World War, RPVs since then have been used as targets for artillery guns, missiles and piloted aircraft or to bring exposed film of hostile territory. With advanced technology, RPVs are now being so designed so as to carry payloads for varied purposes and missions, such as for surveillance (TV cameras, Infra Red (IR) Imagers, sensors) or equipment for electronic counter measures (radar jammers, flares or chaff) or strictly for employment as weapon platforms. 4. A number of countries are today engaged in RPV development projects, prominent amongst these being UK, USA, France and Israel. It has been stated that the RPVs will be able to take on a number of missions and assignments, which are currently being performed by manned aircraft. As tactical aircraft are too few and too expensive to launch for random searches for targets in a battle area, manned reconnaissance (recce) in particular is being reduced in emphasis in favour of RPVs, which are cheaper. The comparative cost of a lost RPV vis-Ã  -vis a manned aircraft with a trained pilot is in itself a sufficient and good enough reason for undertaking such a research and development. 5. RPV can provide close recce of troops deployed in depth which would otherwise have to be undertaken by fighter aircraft, perform spotting functions for incoming munitions and designate as well as destroy targets, Jam enemys electronic equipment, act as radio relay stations and provide real-time intelligence. Further, by penetrating an enemys territory they alert electronic systems and this leads to their early detection. RPVs are therefore about to become an invaluable accretion for providing real-time, over the battlefield surveillance capability. But for all its virtues it is still being debated as to whether an RPV will be able to stand and fight alone or would it only compliment an air force. 6. Of the principles of war defined by Clausewitz the element of surprise has probably made the greatest contribution to success. In the military context therefore the denial of surprise to a potential aggressor is paramount. Equally the acquisition of intelligence is a vital factor in any operational venture. From the very earliest days of aviation the foresighted became aware of the use of aerial platforms for reconnaissance tasks. This has been true throughout the history of warfare. The Second World War saw a quantum leap in reconnaissance from the third dimension. In the Arab Israel wars of 1967 and 1973 the use of aerial reconnaissance enabled Israel dramatically to demonstrate the use of force multiplication through intelligence gained. Air reconnaissance has always been important to the success in war. It is the UAV whose time has come in ensuring that aerial reconnaissance continues to give intelligence in a high intensity air defence scenario. They have proved their worth i n reconnaissance and surveillance. 7. In an age of shrinking defence budgets, expensive manned aircraft and high cost of aircrew training most of the modern armed forces around the world are realising the need to employ RPVs for missions in the dense hostile Air Defence (AD) environment. Missions which were considered extremely dangerous and yet important can now be undertaken by RPVs with relative impunity. Owing to their small radar, IR signature and the ability to spoof the enemy, RPVs can give vital real time data about the enemy to commanders on the ground. RPVs if employed intelligently can make a significant contribution by keeping manned aircraft out of the hostile AD threats while providing real time information and at the same time denying the same by effective electronic warfare to the decision makers in a conflict between adversaries. Statement of the Problem 8. To study and evaluate the efficacy of employing UAVs in ISR role in sub-conventional warfare in the Indian context with special reference to counter terrorist operation across our vast borders. Justification of the Study 9. The UAV has shown, in counter-insurgency and in anti-terrorist operations as much as in war, the critical importance of an eye in the sky. UAV can be effectively employed in gathering the intelligence in terrorist training camps, their infiltration routes etc, to build an effective databank for use in the future. The Israel Army has deployed a new miniature unmanned aerial vehicle in counter-insurgency operations over the West Bank. The Israeli army has launched operations of the Skylark tactical UAV for counter-insurgency missions in the northern West Bank. Skylark began flying missions in late 2005 in what marked the first operational deployment of the new UAV. The MQ-1 Predator, armed with the AGM-114 Hellfire missile continues to be one of the US militarys most requested systems, assisting in the execution of the global war on terror by finding, fixing, tracking, targeting, engaging, and assessing suspected terrorist locations. 10. Historically unmanned aircrafts have been employed successfully in number of conventional operations. Their relatively low cost and the modest political embarrassment likely to be caused by their loss, seems to make them irreplaceable especially in a LICO environment where the enemy is difficult to identify and the political compulsions are high. UAVs can facilitate employment of aircraft, long-range guns and missiles by accurate target acquisition.. UAVs hold out a promise of providing a range of ISR and other support missions. Some of these are battlefield reconnaissance and surveillance, fire control and direction, communication and radar suppression. This study has been prompted in being able to identify and analyse the technical and tactical requirements of a UAV for aerial reconnaissance and to suggest the principle of employment for the task in sub conventional war.. 11. The day of the UAV as a natural ingredient of military thinking is much nearer than it was a decade ago, but there is still a need for clearer and more widespread understanding of what the UAV can be used to do as a tool for reconnaissance in a sub-conventional warfare which is more likely to be faced by our country in the future. Hypothesis 12. UAVs have been proposed for several mission areas including ISR, communications, and weapons delivery. The UAVs were used extensively in recent war. Direction is needed to ensure these maturing UAVs are used in the most effective way. The on-going revolution in sensor technology that will improve the UAVs ability to perform ISR missions now conducted by high-value, manned assets. 13. Todays ISR missions are sophisticated operations. Covert or overt, they are executed using traditional techniques and modern technology – with expensive equipment and infrastructures often requiring highly skilled operators. The requirement for information is likely to keep increasing as warfare becomes more oriented towards reconnaissance-strike. In future scenarios, no one system is going to be able t o meet all data collection requirements. Manned aircraft will not be available for all the intelligence needs of the warfighter. Satellite systems also have limitations that will prevent them from being the sole suppliers of information. The capabilities of UAVs make them ideally suited to fill the increasing void between intelligence requirements and existing data collection capability. Scope 14. The scope of this dissertation is to go into the evolution of UAVs, development and employment of UAV in recent wars. It will concentrate on the ISR aspects while identifying the characteristics/requirements of a UAV in a sub-conventional war. As UAVs being one of the high leverage systems of the future, the Air Force has to make a concerted effort to procure UAVs and sensor technologies with a particular emphasis on intelligence, surveillance, and reconnaissance (ISR) applications. This paper addresses considerations for improving the future application of UAVs for the ISR mission. Furthermore, the Air Force should seize the opportunity to leverage the rapid advances in sensor and information technology to increase the capability of UAVs to perform ISR while also performing other vital air power missions. 15. The scope of this dissertation is to critically analyse the efficacy of employment of UAVs in Armed role in sub-conventional environment which is more likely to be faced by India in future. It aims to study the application of UAV in LICO, study the advantages of employing UAVs in LICO in ISR role and suggest the philosophy for employment of UAVs in LICO in the ISR role. Methods of Data Collection 16. The information in this dissertation has been collected from the reference material available in the DSSC Library and from the Internet. The bibliography of the sources is appended at the end of the text. Organisation of the Dissertation 17. It is proposed to study the subject in the following manner:- (a) Chapter I. Introduction. (b) Chapter II . Evolution of UAVs. (c) Chapter III . Classification of UAVs. (d) Chapter IV . Characteristics of UAVs. (e) Chapter V . Importance of UAVs and ISR Sensors. (f) Chapter VI . Principles of employment of the UAV for aerial reconnaissance. (g) Chapter VII . Low intensity conflict operations. (h) Chapter VIII. Employment philosophy for UAVs in sub conventional warfare. (j) Chapter IX . Conclusion CHAPTER II EVOLUTION OF UAVs UAV technology is a vast field with wide and enough scope for exploration to produce a new and challenging tool of warfare VK Madhok Battlefields of The Early 21st Century. History of Evolution of UAVs/RPVs 1. Unmanned aircraft have a history as long as that of aviation itself. Even before the First World War a French artillery officer, Rene Lorin had proposed the use of flying bombs to attack distant targets. This aircraft he suggested could be stabilized in flight by a combination of gyroscopes and barometer, guided along the track by radio signal from an accompanying piloted aircraft propelled by a pulse jet or ram jet engine to hit the target. 2. The drones/RPV idea actually goes back to the technology of the First World War. The grandparents of todays unmanned vehicles were the Kettering bug and Sperry Aerial Torpedo used in 1917 and 1918. They were winged carts on wheels with engines that somehow managed to lift them into the air after a fast start on a pair of rails. Though they flew, they left much to be desired in terms of sophistication and were not useful as an accurate, winged bomb. More successful, however was the effort that lasted from 1928 to 1932 in which the Curtis Robin aircraft was turned into a working drone. Then, in the late 1930s there was a rush of military interest in remotely controlled vehicles, which led to a raft of special weapons including a second Bug, essentially a surface to surface buzz bomb, and the Bat, a radio controlled glide Bomb. Out of this pack came the first truly usable weapon: the crude but legal GB 1, which was a 2000 bomb with plywood wings and rudders and a radio control packag e. These were dropped from B-17s and visually guided by bombardiers to their target. In 1943, 108 GB-1s were dropped on cologne causing heavy damage. Later in the war came the GB-4 Robin, the first television guided weapon and Q-2 developed by Ryan Aeronautical Company (now Teledyne–Ryan) in 1946 from which have developed most of todays modern RPVs/UAVs. 3. In the United States, the UAV has normally been associated with the reconnaissance mission and designed to be a recoverable asset for multiple flight operations. The remotely piloted vehicles (RPV) of the early 1960s were developed in response to the perceived vulnerability of the U-2 reconnaissance aircraft, which had been downed over the Soviet Union in 1960 and again over Cuba in 1962.Red Wagon was the code name for a 1960 project by Ryan Aeronautical Company to demonstrate how its drones could be used for unmanned, remotely guided photographic reconnaissance missions. As early as 1965, modified Ryan Firebee drones were used to overfly China with some losses experienced. Vietnam War 4. The best known UAV operations were those conducted by the United States Air Force during the Vietnam War. Ryan BQM-34 (Ryan designation: Type 147) Lightning Bug drones were deployed to the theater in 1964.[iii] . In addition to the reconnaissance role, Teledyne Ryan also experimented with lethal versions of the BQM-34 drone. In 1971 and 1972, drones were armed with Maverick missiles or electro-optically guided bombs (Stubby Hobo) in an attempt to develop an unmanned defense suppression aircraft to be flown in conjunction with manned strike aircraft. 5. The Vietnam War was notable in two regards with respect to unmanned aircraft. It was the first war in which reconnaissance UAV were employed and it was notable for the ubiquity of the drones which was use throughout the war. An average of one mission was flown each day during this lengthy war. Employment in Recent Conflicts 6. Yom Kippur – 73 . It was in 1973, that the Israelis effectively used the RPV for reconnaissance and surveillance. The main unmanned aircraft were Mastiff, Scout and the Pioneer. These could also be used for Electronic Warfare. The valuable information gained from these sorties, besides the fire drawn from Arab SAMs which increased the vulnerability of the Air Defence systems found the Unmanned Aerial Vehicle enjoying a pivotal role in the Israeli success. 7. Bekka Valley – 1982. The Israelis once again explored the use of unmanned aircraft during air operations. Besides surveillance and intelligence gathering drones over the Syrian air space were able to gauge reactions of the air defence systems and cater for suitable counter measure. During the Israeli attack, it is reported that RPVs were used to monitor runway activity, activate Syrian fire control radars so that behind the first wave of decoy aircraft, Israeli aircraft could launch their anti, radiation missiles for neutralization of the radars. A large degree of success can be attributed to the employment of this platform wherein the Syrian had losses of 19 SAM batteries and 86 combat aircraft for the corresponding loss of only a solitary Israeli aircraft. The UAVs used were Teledyne, Scout, Mastiff, Samson and Delilah. It was therefore seen that in a dense AD environment, the use of unmanned aircraft would provide rich dividends. 8. The types of RPVs used were the Teledyne BQM-34, Scout, Mastiff, Samson and Delilah. During the operation certain important lessons were learnt, namely:- (a) Training under operational condition is essential for success of operations. (b) Instead of an all-purpose RPV, a family of RPVs with specific task related capability would be more suitable. (c) Simulation of fighter aircraft with use of corner reflector on RPV could lend an element of surprise. (d) The RPVs proved to be a major force multiplier. (e) The low radar, IR, acoustic and optical signature reduced its vulnerability to ground fire and electronic counter measures. (f) The Bekaa Valley operation proved that RPVs are a cost effective means of conducting reconnaissance, electronic warfare and intelligence gathering. (g) It is an ideal platform for employment in a dense AD environment of a modern TBA. (h) The operations re-emphasized the worlds faith in the utility of RPVs in a modern battle. Gulf War 1991 9. UAVs were used extensively by the US in the Gulf War. The Israeli built Pioneer UAV flew 530 missions into Iraqi territory. The other types of UAVs which were used by the US were the BAI-Exdrone and the French Alpilles-MART. Besides the conventional uses of reconnaissance, surveillance, target acquisition and Arty fire control, UAVs were used innovatively for pre-ingress route reconnaissance of Apache AH-64 helicopters, individual chemical agent detection (ICAD) and command, control, communication and intelligence functions The US Navy used UAVs for detection of enemy vessels, detection of Silkworm anti-shipping missile sites, mine detection and naval gunfire direction. The Multi National Forces employed UAVs like the Pioneer, Pointer, Midge, Mart and the Exdrone for reconnaissance, surveillance and battle damage assessment. The US Marine Corps extensive use of UAVs offset the Armys shortfall in aircraft-based reconnaissance. (a) Pioneer . Six Pioneer units each equipped with five UAVs were deployed in the theatre, three with the US Marines, one with US army and one each on USS Missouri and USS Wisconsin. It was used round-the- clock, using TV or (forward looking infra-red) FLIR sensors, for (reconnaissance, intelligence, surveillance and target acquisition (RISTA). The US Navy used it to search for Silkworm sites, air defence arty guns; and command and control bunkers. The US Marines used them for real-time targeting with attack aircraft. Pioneers flew 307 sorties in the campaign logging 1011 hours. Of these, seven were lost two to AD arty and five to non-combat reasons, and 26 were damaged of which 13 were repaired in theater and re-used. Pioneer, already a veteran of activity in the Gulf, reiterated its value, both from the decks of the battleships of USS Missouri and Wisconsin and with the ground forces. One Pioneer achieved a bizarre first for UAVs when a group of Iraqi soldiers, seeing their bunker under observat ion from the circling craft, emerged waving white flags. (b) Pointer . Pointer is a low cost, hand launched and battery operated RPV that is equipped with a TV camera. Weighing only 8 pounds, its use was limited due to strong winds. Nonetheless, pointer was used during the early morning and late afternoons when winds were light. It was often used for rear area security, checking for foot prints in the sand that had not been there the night before. It was also sometimes used to scout roads before vehicles moved down them. (c) F-47A Exdrones . These were deployed during the Gulf War in the surveillance role, carrying miniature colour TV cameras and microwave video transmitters. Amongst other achievements, it detected that Iraqi forces had abandoned their defences in Kuwait, allowing the US Marines to advance more than a day earlier than what had been planned. This was also used in electronic warfare roles such as jamming and communication interception. 10. Some of the important lessons learnt from Gulf War are:- (a) Diverse family of RPVs are required rather than one all-purpose model like Pioneer with US. (b) Smaller, target-spotting tactical RPVs would be easier to operate near the front lines. (c) Larger, long-endurance unmanned vehicles could take off from behind the battle field and yet patrol large strategic areas. (d) Small numbers of low observable RPVs could carry out recce missions with high chance of survival. 11. Bosnian Conflict . The NATO forces in Bosnia used the Tier-2 Predator to monitor the enforcement of cease-fire. Specific tasks included detection of movement of ammunition at night and detection of tampering of mass graves by Bosnian Serbs at night. CHAPTER II I CLASSIFICTION OF UAV Knowledge of an enemys dispositions and movements has always been a key to success in war John WR Taylor, David Mondey Spies in the Sky. 1. Classification of UAVs may be based on important attributes such as range, endurance, flight altitude and launch or recovery methods. Broadly UAVs can be classified into tactical and strategic categories. A further sub division may also include offensive UAVs and Decoys. 2. Relevance. It is important that we understand the broad classification of the UAV tree as it would thereafter be easy to associate roles that can be assigned to the UAV in context of tasks which manned aircraft are required to perform. For any comparison with the manned aircraft, a generic understanding enables us to be able to oversee the debate between manned aircraft vis a vis manned aircraft from an overall objective and broader perspective. 3. Tactical UAV: (a) Micro UAV . Mainly useful for reconnaissance, surveillance and target acquisition (RSTA), sampling NBC and Electronic Warfare (EW), the range is limited to 10 kms with endurance of less than an hour and max altitude of 250 metres. (b) Mini UAV . Mostly for civil use and similar to micro UAV except that the endurance is greater upto two hours. (c) Close Range UAV . With a range of 10 to 30 Kms, and endurance of 2-4 hrs, ceiling of 3000 meters, this group is used for RSTA, arty correction and mine detection. (d) Short Range UAV . Range of 30-70 Km and an endurance of 3 to 6 hrs, This could also be employed for NBC sampling and post strike damage assessment. (e) Medium Range UAV . The range is enhanced up to 70-200 kms with endurance of 6-10 hr and the altitude band from 3000-5000 metres. This is used for communication relays also. (f) Low Altitude Deep Penetration UAV . The main feature is its ability to escape enemy radar cover. It has an endurance of up to an hour with a range of beyond 250 Km and ceiling limits of 9000 m. This is mainly armed to provide commanders the capability to look deep into enemy territory. (g) Long Range UAV. With a range of up to 1000 kms and endurance of 6-13 hrs, the UAV is mainly employed on RSTA, Post strike damage assessment and communications relays. (h) Endurance UAVs. As the name suggests, it has the ability to operate upto 24 hrs and ranges greater than 500 kms. Utilized for RSTA, post strike damage assessment, relay, Electronic Warfare and NBC sampling. 4. Strategic UAV (a) Medium Altitude Long Endurance (MALE). The striking feature is that it can be used for weapons delivery. Operating in a range of 500-700 Kms from 234-48 hrs, it can also be used in tactical roles upto a ceiling from 5000 to 8000 metres. (b) High Altitude Long Endurance . Operating in the 15000 – 20000 metres band, it can be utilized as a missile launch vehicle. It operates for ranges upto 6000 kms. 5. Offensive UAV. This category caters for weapons which are anti-tank/vehicle, anti-radar or antiship. 6. Decoys . Certain aerial and naval decoys with endurance ranging from a few minutes to several hours, these may be launched via canisters, rockets or air launched. 22. Sensor Systems . The sensor systems are required for the various modes of reconnaissance which can be carried out by the UAV. These will be discussed in detail further in this paper. The various modes of reconnaissance are:- (a) Photographic Reconnaissance . The main sensor for photographic reconnaissance is the camera. The various types of camera systems for photographic reconnaissance are:- (i) Vertical Photograph Cameras. (ii) Oblique Photograph Cameras. (iii) Pin point Photograph Cameras. (iv) Split Vertical Photograph Cameras. (v) Trimetrogon. (vi) Multi-Camera Fan. (vii) Panoramic. (viii) Long Range Oblique Photography and Long Range Aerial Photography. (ix) Sonne Strip Photography. (x) IR Camera. (b) Infra- red Reconnaissance . The infra-red spectrum is used in reconnaissance in two distinct forms. The reflective portion of the infra-red is made use of in infra-red photography. The emissive portion of the infra-red is used in reconnaissance with the aid of appropriate sensors by a process called thermal imaging. This mode of reconnaissance uses emissive infra-red radiations and employs thermal detectors that transform infra-red radiation into detectable electrical signals. The output electrical voltage is recorded either on a magnetic tape for digital analysis by computer or on a film. The main types of infra-red reconnaissance systems which can be used by the UAV are:- (i) Infra-red Line Scan. (ii) Forward Looking Infra-Red (FLIR). (c ) Reconnaissance by Electronic Means . Reconnaissance by electronic means involves the use of radar and TV i.e. they need microwave sensors and light sensors. The two main types of reconnaissance by electronic means are thus radar reconnaissance and TV reconnaissance. 7. There is today a very clear direction of evolving UAV for specific purposes. Much like manned aircraft which have specified roles such as Air Defence, Air Interdiction and so on. Specialization is the buzz word in the UAV family wherein by changing payloads different functions can be performed. The broad classification above is likely to undergo changes in the future where specific functional UAVs would be listed. CHAPTER I V CHARACTERISTICS OF UAV Knowledge of an enemys dispositions and movements has always been a key to success in war John WR Taylor, David Mondey Spies in the Sky. UAV And Manned Aircraft A Comparison 1. Cost (a) Cost of Aircraft . The high cost of current generation fighter aircraft is a cause for concern to air force planners the world over. What is worse is their unit cost is continuing to escalate inexorably. A few examples will corroborate the fact. At 1985 prices, USAF aircraft like the P-51 Mustang of 1944 would have cost $ 0.5 million; the F- 100 Super Sabre of 1954 would be a little over $ 2 million; the F-4 Phantom of 1962 would be $ 6 million; while the F-15 Eagle of 1974 would cost $ 25 million. Similarly in the UK, the Harrier GR. 1 of 1970 costs four times as much as the Hunter fighter of the fifties and the Hawk training aircraft costs one and a half times as much as its predecessor the Gnat. In our own air force, the Mirage 2000 cost Rs 24 crores a piece when it was inducted in the Indian Airforce in 1985, while today it is in excess of 120 crores. (b) Cost of In-service Support . It is not just the unit capital cost of aircraft that is rising this way, so is the cost of in-service support. As a rough rule of thumb, the cost of in-service support for an aircraft is about twice the production cost. Statistics from Tactical Air Command of the USAF show that the cost of replenishment spare parts during the in-service life an F-4G aircraft is $ 3.5 million and for an F-15A, it is $ 10.7 million, while the depot maintenance costs for the same aircraft are $ 7.7 million and $ 5.8 million respectively. The total in-service operational and support costs for one aircraft including all items such as fuel, pay for unit personnel, pay for indirect support personnel, support equipment and so on, work out to $ 66.4 million and $ 64.2 million respectively for the two types. (c ) Personnel Costs . The cost of personnel to operate, service and support the aircraft are also high. Combat fighters in the USAF inventory need an average of 17 maintenance specialists for each machine, and a detachment of 24 F-15s for a 30 day period calls for 621 maintenance specialist in 22 different trades, together with 370 tons of equipment. The aircrew are also an expensive asset and their training costs are rising sharply. For example, it costs the RAF a little over $ 5 million at 1987 prices to train a pilot of a fast jet aircraft like the Harrier or a Tornado. (d) Cost of the Training Organization . The ratio of training aircraft to combat aircraft has always been high in any modern air force. For example in the RAF in 1987, there were 758 combat aircraft as compared to 833 in training units (including operational conversion units). It implies that higher the number of combat aircraft in any air force, the number of training aircraft would increase in a higher if not similar proportion. (e) Cost of UAVs versus Aircraft . (i) Mini UAVs . UAVs require neither crew nor crew supporting systems. Therefore, they are bound to be simple, smaller and thus a great deal cheaper than their manned counterparts. For example the unit cost of a Pointer RPV is $10,000. On the other hand the cost of Mig 21, which is used for TAC-R in the Indian Air Force, is $ 1 million. Now if we include the costs of in-service support, personnel costs and the cost of training Organization, the cost balance tips heavily in favor of UAVs. This also means that for same investment, we can have more UAVs and the sheer weight of numbers should be able to make up for whatever deficiencies which result from the absence of a crew. (ii) HALE . Though there are UAVs like the Condor HALE whose unit cost is $ 20 million (at 1993 prices), it would be more appropriate to compare them with satellites; and aircraft like the SR-71, U-2 and Mig 25, due to their role and capability. Then their cost-effectiveness can scarcely be in doubt. (iii) Mission C osts . A comparison of the mission costs of a UAV and an equivalent aircraft for the same role will further corroborate the economy of UAVs. 2. Mobility . (a) Tactical . High mobility and reach are two characteristics of air power which can be exploited in a variety of ways, such as to concentrate for effect or to disperse for survival. It is in these fields that UAVs have a major disadvantage vis-Ã  -vis manned aircraft, since they cannot easily transfer their effort between bases. They need to be transported from one operating site to another whereas a Unmanned Aerial Vehicles (UAVs) in Subconventional War Unmanned Aerial Vehicles (UAVs) in Subconventional War CHAPTER- I INTRODUCTION 1. Many military strategists and theorists have concluded, based on recent history, the nature of future wars will be limited to regional and intrastate conflicts. Large interstate wars such as World Wars One and Two and the Persian Gulf War are not likely to be the wars of the future. UAVs are increasingly standard features of the modern combat theaters and Low Intensity Conflict zones where ISR missions may need to be carried out. Todays ISR missions are sophisticated operations. Covert or overt, they are executed using traditional techniques and modern technology – with expensive equipment and infrastructures often requiring highly skilled operators. Remotely Piloted Vehicles (RPVs)/Unmanned Aerial Vehicles (UAVs) are small unmanned aircraft which came into being as mans quest for newer and better tools of warfare. 2. Unmanned aerial vehicles (UAVs) will play a key role in dealing with low intensity conflicts abetted by both internal elements and unfriendly neighbours. Indias great neighbours not being really friendly be it Pakistan or China. Avoiding all risk to human life or manned search aircraft operating in hostile territory, poor weather or hazardous environments, UAVs fitted with sensors can be used to safely perform the Search-Locate-Identify elements of importance in a missions. Unmanned (or uninhabited) aerial vehicles (UAVs) are methodically becoming a central theme in the mosaic of Air Force systems and capability. The questions regarding employment of UAVs are not so much about if they should be developed but how to integrate them into Air Force doctrine and organizations. The Study identified reconnaissance UAVs as one of the high leverage systems of the future. Accordingly, the Air Force has made a concerted effort to develop UAVs and sensor technologies with a particular emphasi s on intelligence, surveillance, and reconnaissance (ISR) applications. This paper addresses considerations for improving the future application of UAVs for the ISR mission and their employment in LICO across our vast borders. Specifically, this research illustrates that UAVs in concert with manned and space assets addresses several Air Force ISR needs. Furthermore, the Air Force should seize the opportunity to leverage the rapid advances in sensor and information technology to increase the capability of UAVs to perform ISR while also performing other vital air power missions. 3. Used as drones in the First World War, RPVs since then have been used as targets for artillery guns, missiles and piloted aircraft or to bring exposed film of hostile territory. With advanced technology, RPVs are now being so designed so as to carry payloads for varied purposes and missions, such as for surveillance (TV cameras, Infra Red (IR) Imagers, sensors) or equipment for electronic counter measures (radar jammers, flares or chaff) or strictly for employment as weapon platforms. 4. A number of countries are today engaged in RPV development projects, prominent amongst these being UK, USA, France and Israel. It has been stated that the RPVs will be able to take on a number of missions and assignments, which are currently being performed by manned aircraft. As tactical aircraft are too few and too expensive to launch for random searches for targets in a battle area, manned reconnaissance (recce) in particular is being reduced in emphasis in favour of RPVs, which are cheaper. The comparative cost of a lost RPV vis-Ã  -vis a manned aircraft with a trained pilot is in itself a sufficient and good enough reason for undertaking such a research and development. 5. RPV can provide close recce of troops deployed in depth which would otherwise have to be undertaken by fighter aircraft, perform spotting functions for incoming munitions and designate as well as destroy targets, Jam enemys electronic equipment, act as radio relay stations and provide real-time intelligence. Further, by penetrating an enemys territory they alert electronic systems and this leads to their early detection. RPVs are therefore about to become an invaluable accretion for providing real-time, over the battlefield surveillance capability. But for all its virtues it is still being debated as to whether an RPV will be able to stand and fight alone or would it only compliment an air force. 6. Of the principles of war defined by Clausewitz the element of surprise has probably made the greatest contribution to success. In the military context therefore the denial of surprise to a potential aggressor is paramount. Equally the acquisition of intelligence is a vital factor in any operational venture. From the very earliest days of aviation the foresighted became aware of the use of aerial platforms for reconnaissance tasks. This has been true throughout the history of warfare. The Second World War saw a quantum leap in reconnaissance from the third dimension. In the Arab Israel wars of 1967 and 1973 the use of aerial reconnaissance enabled Israel dramatically to demonstrate the use of force multiplication through intelligence gained. Air reconnaissance has always been important to the success in war. It is the UAV whose time has come in ensuring that aerial reconnaissance continues to give intelligence in a high intensity air defence scenario. They have proved their worth i n reconnaissance and surveillance. 7. In an age of shrinking defence budgets, expensive manned aircraft and high cost of aircrew training most of the modern armed forces around the world are realising the need to employ RPVs for missions in the dense hostile Air Defence (AD) environment. Missions which were considered extremely dangerous and yet important can now be undertaken by RPVs with relative impunity. Owing to their small radar, IR signature and the ability to spoof the enemy, RPVs can give vital real time data about the enemy to commanders on the ground. RPVs if employed intelligently can make a significant contribution by keeping manned aircraft out of the hostile AD threats while providing real time information and at the same time denying the same by effective electronic warfare to the decision makers in a conflict between adversaries. Statement of the Problem 8. To study and evaluate the efficacy of employing UAVs in ISR role in sub-conventional warfare in the Indian context with special reference to counter terrorist operation across our vast borders. Justification of the Study 9. The UAV has shown, in counter-insurgency and in anti-terrorist operations as much as in war, the critical importance of an eye in the sky. UAV can be effectively employed in gathering the intelligence in terrorist training camps, their infiltration routes etc, to build an effective databank for use in the future. The Israel Army has deployed a new miniature unmanned aerial vehicle in counter-insurgency operations over the West Bank. The Israeli army has launched operations of the Skylark tactical UAV for counter-insurgency missions in the northern West Bank. Skylark began flying missions in late 2005 in what marked the first operational deployment of the new UAV. The MQ-1 Predator, armed with the AGM-114 Hellfire missile continues to be one of the US militarys most requested systems, assisting in the execution of the global war on terror by finding, fixing, tracking, targeting, engaging, and assessing suspected terrorist locations. 10. Historically unmanned aircrafts have been employed successfully in number of conventional operations. Their relatively low cost and the modest political embarrassment likely to be caused by their loss, seems to make them irreplaceable especially in a LICO environment where the enemy is difficult to identify and the political compulsions are high. UAVs can facilitate employment of aircraft, long-range guns and missiles by accurate target acquisition.. UAVs hold out a promise of providing a range of ISR and other support missions. Some of these are battlefield reconnaissance and surveillance, fire control and direction, communication and radar suppression. This study has been prompted in being able to identify and analyse the technical and tactical requirements of a UAV for aerial reconnaissance and to suggest the principle of employment for the task in sub conventional war.. 11. The day of the UAV as a natural ingredient of military thinking is much nearer than it was a decade ago, but there is still a need for clearer and more widespread understanding of what the UAV can be used to do as a tool for reconnaissance in a sub-conventional warfare which is more likely to be faced by our country in the future. Hypothesis 12. UAVs have been proposed for several mission areas including ISR, communications, and weapons delivery. The UAVs were used extensively in recent war. Direction is needed to ensure these maturing UAVs are used in the most effective way. The on-going revolution in sensor technology that will improve the UAVs ability to perform ISR missions now conducted by high-value, manned assets. 13. Todays ISR missions are sophisticated operations. Covert or overt, they are executed using traditional techniques and modern technology – with expensive equipment and infrastructures often requiring highly skilled operators. The requirement for information is likely to keep increasing as warfare becomes more oriented towards reconnaissance-strike. In future scenarios, no one system is going to be able t o meet all data collection requirements. Manned aircraft will not be available for all the intelligence needs of the warfighter. Satellite systems also have limitations that will prevent them from being the sole suppliers of information. The capabilities of UAVs make them ideally suited to fill the increasing void between intelligence requirements and existing data collection capability. Scope 14. The scope of this dissertation is to go into the evolution of UAVs, development and employment of UAV in recent wars. It will concentrate on the ISR aspects while identifying the characteristics/requirements of a UAV in a sub-conventional war. As UAVs being one of the high leverage systems of the future, the Air Force has to make a concerted effort to procure UAVs and sensor technologies with a particular emphasis on intelligence, surveillance, and reconnaissance (ISR) applications. This paper addresses considerations for improving the future application of UAVs for the ISR mission. Furthermore, the Air Force should seize the opportunity to leverage the rapid advances in sensor and information technology to increase the capability of UAVs to perform ISR while also performing other vital air power missions. 15. The scope of this dissertation is to critically analyse the efficacy of employment of UAVs in Armed role in sub-conventional environment which is more likely to be faced by India in future. It aims to study the application of UAV in LICO, study the advantages of employing UAVs in LICO in ISR role and suggest the philosophy for employment of UAVs in LICO in the ISR role. Methods of Data Collection 16. The information in this dissertation has been collected from the reference material available in the DSSC Library and from the Internet. The bibliography of the sources is appended at the end of the text. Organisation of the Dissertation 17. It is proposed to study the subject in the following manner:- (a) Chapter I. Introduction. (b) Chapter II . Evolution of UAVs. (c) Chapter III . Classification of UAVs. (d) Chapter IV . Characteristics of UAVs. (e) Chapter V . Importance of UAVs and ISR Sensors. (f) Chapter VI . Principles of employment of the UAV for aerial reconnaissance. (g) Chapter VII . Low intensity conflict operations. (h) Chapter VIII. Employment philosophy for UAVs in sub conventional warfare. (j) Chapter IX . Conclusion CHAPTER II EVOLUTION OF UAVs UAV technology is a vast field with wide and enough scope for exploration to produce a new and challenging tool of warfare VK Madhok Battlefields of The Early 21st Century. History of Evolution of UAVs/RPVs 1. Unmanned aircraft have a history as long as that of aviation itself. Even before the First World War a French artillery officer, Rene Lorin had proposed the use of flying bombs to attack distant targets. This aircraft he suggested could be stabilized in flight by a combination of gyroscopes and barometer, guided along the track by radio signal from an accompanying piloted aircraft propelled by a pulse jet or ram jet engine to hit the target. 2. The drones/RPV idea actually goes back to the technology of the First World War. The grandparents of todays unmanned vehicles were the Kettering bug and Sperry Aerial Torpedo used in 1917 and 1918. They were winged carts on wheels with engines that somehow managed to lift them into the air after a fast start on a pair of rails. Though they flew, they left much to be desired in terms of sophistication and were not useful as an accurate, winged bomb. More successful, however was the effort that lasted from 1928 to 1932 in which the Curtis Robin aircraft was turned into a working drone. Then, in the late 1930s there was a rush of military interest in remotely controlled vehicles, which led to a raft of special weapons including a second Bug, essentially a surface to surface buzz bomb, and the Bat, a radio controlled glide Bomb. Out of this pack came the first truly usable weapon: the crude but legal GB 1, which was a 2000 bomb with plywood wings and rudders and a radio control packag e. These were dropped from B-17s and visually guided by bombardiers to their target. In 1943, 108 GB-1s were dropped on cologne causing heavy damage. Later in the war came the GB-4 Robin, the first television guided weapon and Q-2 developed by Ryan Aeronautical Company (now Teledyne–Ryan) in 1946 from which have developed most of todays modern RPVs/UAVs. 3. In the United States, the UAV has normally been associated with the reconnaissance mission and designed to be a recoverable asset for multiple flight operations. The remotely piloted vehicles (RPV) of the early 1960s were developed in response to the perceived vulnerability of the U-2 reconnaissance aircraft, which had been downed over the Soviet Union in 1960 and again over Cuba in 1962.Red Wagon was the code name for a 1960 project by Ryan Aeronautical Company to demonstrate how its drones could be used for unmanned, remotely guided photographic reconnaissance missions. As early as 1965, modified Ryan Firebee drones were used to overfly China with some losses experienced. Vietnam War 4. The best known UAV operations were those conducted by the United States Air Force during the Vietnam War. Ryan BQM-34 (Ryan designation: Type 147) Lightning Bug drones were deployed to the theater in 1964.[iii] . In addition to the reconnaissance role, Teledyne Ryan also experimented with lethal versions of the BQM-34 drone. In 1971 and 1972, drones were armed with Maverick missiles or electro-optically guided bombs (Stubby Hobo) in an attempt to develop an unmanned defense suppression aircraft to be flown in conjunction with manned strike aircraft. 5. The Vietnam War was notable in two regards with respect to unmanned aircraft. It was the first war in which reconnaissance UAV were employed and it was notable for the ubiquity of the drones which was use throughout the war. An average of one mission was flown each day during this lengthy war. Employment in Recent Conflicts 6. Yom Kippur – 73 . It was in 1973, that the Israelis effectively used the RPV for reconnaissance and surveillance. The main unmanned aircraft were Mastiff, Scout and the Pioneer. These could also be used for Electronic Warfare. The valuable information gained from these sorties, besides the fire drawn from Arab SAMs which increased the vulnerability of the Air Defence systems found the Unmanned Aerial Vehicle enjoying a pivotal role in the Israeli success. 7. Bekka Valley – 1982. The Israelis once again explored the use of unmanned aircraft during air operations. Besides surveillance and intelligence gathering drones over the Syrian air space were able to gauge reactions of the air defence systems and cater for suitable counter measure. During the Israeli attack, it is reported that RPVs were used to monitor runway activity, activate Syrian fire control radars so that behind the first wave of decoy aircraft, Israeli aircraft could launch their anti, radiation missiles for neutralization of the radars. A large degree of success can be attributed to the employment of this platform wherein the Syrian had losses of 19 SAM batteries and 86 combat aircraft for the corresponding loss of only a solitary Israeli aircraft. The UAVs used were Teledyne, Scout, Mastiff, Samson and Delilah. It was therefore seen that in a dense AD environment, the use of unmanned aircraft would provide rich dividends. 8. The types of RPVs used were the Teledyne BQM-34, Scout, Mastiff, Samson and Delilah. During the operation certain important lessons were learnt, namely:- (a) Training under operational condition is essential for success of operations. (b) Instead of an all-purpose RPV, a family of RPVs with specific task related capability would be more suitable. (c) Simulation of fighter aircraft with use of corner reflector on RPV could lend an element of surprise. (d) The RPVs proved to be a major force multiplier. (e) The low radar, IR, acoustic and optical signature reduced its vulnerability to ground fire and electronic counter measures. (f) The Bekaa Valley operation proved that RPVs are a cost effective means of conducting reconnaissance, electronic warfare and intelligence gathering. (g) It is an ideal platform for employment in a dense AD environment of a modern TBA. (h) The operations re-emphasized the worlds faith in the utility of RPVs in a modern battle. Gulf War 1991 9. UAVs were used extensively by the US in the Gulf War. The Israeli built Pioneer UAV flew 530 missions into Iraqi territory. The other types of UAVs which were used by the US were the BAI-Exdrone and the French Alpilles-MART. Besides the conventional uses of reconnaissance, surveillance, target acquisition and Arty fire control, UAVs were used innovatively for pre-ingress route reconnaissance of Apache AH-64 helicopters, individual chemical agent detection (ICAD) and command, control, communication and intelligence functions The US Navy used UAVs for detection of enemy vessels, detection of Silkworm anti-shipping missile sites, mine detection and naval gunfire direction. The Multi National Forces employed UAVs like the Pioneer, Pointer, Midge, Mart and the Exdrone for reconnaissance, surveillance and battle damage assessment. The US Marine Corps extensive use of UAVs offset the Armys shortfall in aircraft-based reconnaissance. (a) Pioneer . Six Pioneer units each equipped with five UAVs were deployed in the theatre, three with the US Marines, one with US army and one each on USS Missouri and USS Wisconsin. It was used round-the- clock, using TV or (forward looking infra-red) FLIR sensors, for (reconnaissance, intelligence, surveillance and target acquisition (RISTA). The US Navy used it to search for Silkworm sites, air defence arty guns; and command and control bunkers. The US Marines used them for real-time targeting with attack aircraft. Pioneers flew 307 sorties in the campaign logging 1011 hours. Of these, seven were lost two to AD arty and five to non-combat reasons, and 26 were damaged of which 13 were repaired in theater and re-used. Pioneer, already a veteran of activity in the Gulf, reiterated its value, both from the decks of the battleships of USS Missouri and Wisconsin and with the ground forces. One Pioneer achieved a bizarre first for UAVs when a group of Iraqi soldiers, seeing their bunker under observat ion from the circling craft, emerged waving white flags. (b) Pointer . Pointer is a low cost, hand launched and battery operated RPV that is equipped with a TV camera. Weighing only 8 pounds, its use was limited due to strong winds. Nonetheless, pointer was used during the early morning and late afternoons when winds were light. It was often used for rear area security, checking for foot prints in the sand that had not been there the night before. It was also sometimes used to scout roads before vehicles moved down them. (c) F-47A Exdrones . These were deployed during the Gulf War in the surveillance role, carrying miniature colour TV cameras and microwave video transmitters. Amongst other achievements, it detected that Iraqi forces had abandoned their defences in Kuwait, allowing the US Marines to advance more than a day earlier than what had been planned. This was also used in electronic warfare roles such as jamming and communication interception. 10. Some of the important lessons learnt from Gulf War are:- (a) Diverse family of RPVs are required rather than one all-purpose model like Pioneer with US. (b) Smaller, target-spotting tactical RPVs would be easier to operate near the front lines. (c) Larger, long-endurance unmanned vehicles could take off from behind the battle field and yet patrol large strategic areas. (d) Small numbers of low observable RPVs could carry out recce missions with high chance of survival. 11. Bosnian Conflict . The NATO forces in Bosnia used the Tier-2 Predator to monitor the enforcement of cease-fire. Specific tasks included detection of movement of ammunition at night and detection of tampering of mass graves by Bosnian Serbs at night. CHAPTER II I CLASSIFICTION OF UAV Knowledge of an enemys dispositions and movements has always been a key to success in war John WR Taylor, David Mondey Spies in the Sky. 1. Classification of UAVs may be based on important attributes such as range, endurance, flight altitude and launch or recovery methods. Broadly UAVs can be classified into tactical and strategic categories. A further sub division may also include offensive UAVs and Decoys. 2. Relevance. It is important that we understand the broad classification of the UAV tree as it would thereafter be easy to associate roles that can be assigned to the UAV in context of tasks which manned aircraft are required to perform. For any comparison with the manned aircraft, a generic understanding enables us to be able to oversee the debate between manned aircraft vis a vis manned aircraft from an overall objective and broader perspective. 3. Tactical UAV: (a) Micro UAV . Mainly useful for reconnaissance, surveillance and target acquisition (RSTA), sampling NBC and Electronic Warfare (EW), the range is limited to 10 kms with endurance of less than an hour and max altitude of 250 metres. (b) Mini UAV . Mostly for civil use and similar to micro UAV except that the endurance is greater upto two hours. (c) Close Range UAV . With a range of 10 to 30 Kms, and endurance of 2-4 hrs, ceiling of 3000 meters, this group is used for RSTA, arty correction and mine detection. (d) Short Range UAV . Range of 30-70 Km and an endurance of 3 to 6 hrs, This could also be employed for NBC sampling and post strike damage assessment. (e) Medium Range UAV . The range is enhanced up to 70-200 kms with endurance of 6-10 hr and the altitude band from 3000-5000 metres. This is used for communication relays also. (f) Low Altitude Deep Penetration UAV . The main feature is its ability to escape enemy radar cover. It has an endurance of up to an hour with a range of beyond 250 Km and ceiling limits of 9000 m. This is mainly armed to provide commanders the capability to look deep into enemy territory. (g) Long Range UAV. With a range of up to 1000 kms and endurance of 6-13 hrs, the UAV is mainly employed on RSTA, Post strike damage assessment and communications relays. (h) Endurance UAVs. As the name suggests, it has the ability to operate upto 24 hrs and ranges greater than 500 kms. Utilized for RSTA, post strike damage assessment, relay, Electronic Warfare and NBC sampling. 4. Strategic UAV (a) Medium Altitude Long Endurance (MALE). The striking feature is that it can be used for weapons delivery. Operating in a range of 500-700 Kms from 234-48 hrs, it can also be used in tactical roles upto a ceiling from 5000 to 8000 metres. (b) High Altitude Long Endurance . Operating in the 15000 – 20000 metres band, it can be utilized as a missile launch vehicle. It operates for ranges upto 6000 kms. 5. Offensive UAV. This category caters for weapons which are anti-tank/vehicle, anti-radar or antiship. 6. Decoys . Certain aerial and naval decoys with endurance ranging from a few minutes to several hours, these may be launched via canisters, rockets or air launched. 22. Sensor Systems . The sensor systems are required for the various modes of reconnaissance which can be carried out by the UAV. These will be discussed in detail further in this paper. The various modes of reconnaissance are:- (a) Photographic Reconnaissance . The main sensor for photographic reconnaissance is the camera. The various types of camera systems for photographic reconnaissance are:- (i) Vertical Photograph Cameras. (ii) Oblique Photograph Cameras. (iii) Pin point Photograph Cameras. (iv) Split Vertical Photograph Cameras. (v) Trimetrogon. (vi) Multi-Camera Fan. (vii) Panoramic. (viii) Long Range Oblique Photography and Long Range Aerial Photography. (ix) Sonne Strip Photography. (x) IR Camera. (b) Infra- red Reconnaissance . The infra-red spectrum is used in reconnaissance in two distinct forms. The reflective portion of the infra-red is made use of in infra-red photography. The emissive portion of the infra-red is used in reconnaissance with the aid of appropriate sensors by a process called thermal imaging. This mode of reconnaissance uses emissive infra-red radiations and employs thermal detectors that transform infra-red radiation into detectable electrical signals. The output electrical voltage is recorded either on a magnetic tape for digital analysis by computer or on a film. The main types of infra-red reconnaissance systems which can be used by the UAV are:- (i) Infra-red Line Scan. (ii) Forward Looking Infra-Red (FLIR). (c ) Reconnaissance by Electronic Means . Reconnaissance by electronic means involves the use of radar and TV i.e. they need microwave sensors and light sensors. The two main types of reconnaissance by electronic means are thus radar reconnaissance and TV reconnaissance. 7. There is today a very clear direction of evolving UAV for specific purposes. Much like manned aircraft which have specified roles such as Air Defence, Air Interdiction and so on. Specialization is the buzz word in the UAV family wherein by changing payloads different functions can be performed. The broad classification above is likely to undergo changes in the future where specific functional UAVs would be listed. CHAPTER I V CHARACTERISTICS OF UAV Knowledge of an enemys dispositions and movements has always been a key to success in war John WR Taylor, David Mondey Spies in the Sky. UAV And Manned Aircraft A Comparison 1. Cost (a) Cost of Aircraft . The high cost of current generation fighter aircraft is a cause for concern to air force planners the world over. What is worse is their unit cost is continuing to escalate inexorably. A few examples will corroborate the fact. At 1985 prices, USAF aircraft like the P-51 Mustang of 1944 would have cost $ 0.5 million; the F- 100 Super Sabre of 1954 would be a little over $ 2 million; the F-4 Phantom of 1962 would be $ 6 million; while the F-15 Eagle of 1974 would cost $ 25 million. Similarly in the UK, the Harrier GR. 1 of 1970 costs four times as much as the Hunter fighter of the fifties and the Hawk training aircraft costs one and a half times as much as its predecessor the Gnat. In our own air force, the Mirage 2000 cost Rs 24 crores a piece when it was inducted in the Indian Airforce in 1985, while today it is in excess of 120 crores. (b) Cost of In-service Support . It is not just the unit capital cost of aircraft that is rising this way, so is the cost of in-service support. As a rough rule of thumb, the cost of in-service support for an aircraft is about twice the production cost. Statistics from Tactical Air Command of the USAF show that the cost of replenishment spare parts during the in-service life an F-4G aircraft is $ 3.5 million and for an F-15A, it is $ 10.7 million, while the depot maintenance costs for the same aircraft are $ 7.7 million and $ 5.8 million respectively. The total in-service operational and support costs for one aircraft including all items such as fuel, pay for unit personnel, pay for indirect support personnel, support equipment and so on, work out to $ 66.4 million and $ 64.2 million respectively for the two types. (c ) Personnel Costs . The cost of personnel to operate, service and support the aircraft are also high. Combat fighters in the USAF inventory need an average of 17 maintenance specialists for each machine, and a detachment of 24 F-15s for a 30 day period calls for 621 maintenance specialist in 22 different trades, together with 370 tons of equipment. The aircrew are also an expensive asset and their training costs are rising sharply. For example, it costs the RAF a little over $ 5 million at 1987 prices to train a pilot of a fast jet aircraft like the Harrier or a Tornado. (d) Cost of the Training Organization . The ratio of training aircraft to combat aircraft has always been high in any modern air force. For example in the RAF in 1987, there were 758 combat aircraft as compared to 833 in training units (including operational conversion units). It implies that higher the number of combat aircraft in any air force, the number of training aircraft would increase in a higher if not similar proportion. (e) Cost of UAVs versus Aircraft . (i) Mini UAVs . UAVs require neither crew nor crew supporting systems. Therefore, they are bound to be simple, smaller and thus a great deal cheaper than their manned counterparts. For example the unit cost of a Pointer RPV is $10,000. On the other hand the cost of Mig 21, which is used for TAC-R in the Indian Air Force, is $ 1 million. Now if we include the costs of in-service support, personnel costs and the cost of training Organization, the cost balance tips heavily in favor of UAVs. This also means that for same investment, we can have more UAVs and the sheer weight of numbers should be able to make up for whatever deficiencies which result from the absence of a crew. (ii) HALE . Though there are UAVs like the Condor HALE whose unit cost is $ 20 million (at 1993 prices), it would be more appropriate to compare them with satellites; and aircraft like the SR-71, U-2 and Mig 25, due to their role and capability. Then their cost-effectiveness can scarcely be in doubt. (iii) Mission C osts . A comparison of the mission costs of a UAV and an equivalent aircraft for the same role will further corroborate the economy of UAVs. 2. Mobility . (a) Tactical . High mobility and reach are two characteristics of air power which can be exploited in a variety of ways, such as to concentrate for effect or to disperse for survival. It is in these fields that UAVs have a major disadvantage vis-Ã  -vis manned aircraft, since they cannot easily transfer their effort between bases. They need to be transported from one operating site to another whereas a